How do I pair my MW01 and use it with my device?

The first time you power on the MW01, it will automatically enter pairing mode.


To manually activate pairing mode, leave the MW01 in the extended position for at least five seconds and look for the indicator light as indicated above.

Once your MW01 is in pairing mode, enable pairing mode on your device and place them adjacent to your MW01.

Select the number of prongs required to connect to the audio input of the intended analog (wired) device. If using a one-prong connection (auxiliary), use only the prong marked "1"


Once prongs are selected, push down to retract the MW01 and connect the prongs to your analog device.