To clean your MW01, we recommend using a microfiber cloth.
Do not soak or submerge, and never use alcohol or other cleaning solutions.
Do not drop, sit on, or allow the product to be exposed to water, moisture, or temperature extremes.
Operate and store this product within the temperature range of -4°F to 113°F (-20°C to 45°C) only. Charge the battery where the temperature is between 41°F and 104°F (5°C and 40°C) only
Connect to your first pair of earphones or headphones, and then activate pairing mode again by placing the MW01 into the extended position and tucking away both prongs (do not power off).
Once the MW01 is in pairing mode - indicated by a pulsing white LED - activate pairing mode on your second set of earphones or headphones, and place them adjacent to your MW01.
A solid white light indicates that you are connected.
Select the required prongs and use MW01 normally.
The MW01 will automatically forget the second pair of earphones or headphones after you power off.
The first time you power on the MW01, it will automatically enter pairing mode.
To manually activate pairing mode, leave the MW01 in the extended position for at least five seconds and look for the indicator light as indicated above.
Once your MW01 is in pairing mode, enable pairing mode on your device and place them adjacent to your MW01.
Select the number of prongs required to connect to the audio input of the intended analog (wired) device. If using a one-prong connection (auxiliary), use only the prong marked "1"
Once prongs are selected, push down to retract the MW01 and connect the prongs to your analog device.
The MW01 lets you use your wireless headphones or earphones with in-flight entertainment, gym equipment, or other devices that provide a single or double prong 3.5mm audio input but no Bluetooth connectivity.
To power on the MW01, simply pull it into the extended position.
When powered on, the MW01 will automatically connect to previously paired headphones or earphones.
The MW01 has up to 22 hours of battery life.
To preserve the battery, MW01 will power off after 10 minutes of inactivity.
MW01 must be manually powered off (by tucking away the prongs and retracting the MW01) and powered back on again in order to reconnect.