Skip to main content

DOCUMENTATION

  • How do I charge my MW07 Plus True Wireless Earphones?

    Your MW07 Plus earphones come with their own charging case which holds an additional three charges for your earphones.

    Store your earphones inside their case when they are not in use. This will allow them to be charged fully each time you begin to use them.

    When you place your earphones inside the case and close the lid, the LEDs on the front of the case will display the battery status for both the case and the earphones.

    Your earphones will charge to full after about 40 minutes in a charged case.

    A green light indicates the battery is between 70 and 100%, amber indicates between 30 and 69%, and red indicates the battery is low - 1 to 29%. If the center battery on your case flashes red or does not display, the case battery is depleted.

    To charge your case, plug the USB-C cable into the back of the case and plug the other end into a power source. Your MW07 Plus earphones come with a USB-C to USB-A adapter.

    The battery status of the case and earphones will illuminate while the earphones are charging.

    Your case will charge to full after about 40 minutes connected to a power source.

  • How do I pair my MW07 Plus True Wireless Earphones to my device?

    When you first receive and unbox your MW07 Plus earphones, they will enter pairing mode automatically.

    To pair with your device:

    1. Open the Bluetooth menu on your source device.
    2. Select "M&D MW07 PLUS R" from the Bluetooth list.
    3. When prompted by your device, confirm connection.

    To manually activate pairing mode, while the right earphone is out of your ear hold down the multi-function button until the indicator light begins to pulse and the pairing tone is heard.

    Note: only one earphone will connect to your device at a time. The bud that's selected can be used independently and will be used for taking calls.  Dual microphones in each earphone provide the freedom to listen or talk with just one earphone.

    The MW07 Plus does not support multipoint connectivity.

  • What do the buttons on my MW07 Plus True Wireless Earphones do?

    On your right earphone, you will find the Multi-Function Button (MFB), which controls playback as well as activates your device's native voice assistant.

    On your left earphone, you will find the Volume rocker, which controls the volume of playback as well as activates Ambient Listening and Active Noise-Cancelling

     

  • How do I adjust the fit on of my MW07 Plus True Wireless Earphones?

    Your MW07 Plus earphones come with multiple ear tips and Fit Wings for the best possible fit.

    When you first open your new earphones, the medium ear tips and Fit Wings will already be attached.

    You may prefer to attach other sized Fit Wings for a more secure fit.

    To attach, first remove the ear tip from your earphone.

    Loop the round opening of the Fit Wing over the driver enclosure as indicated below.

    The smaller openings on the Fit Wing should surround the proximity sensor and charging pins but still leave them exposed.

    To insert your earphones, follow these simple steps.

    1. Tilt your earphone forward, with the ear tip resting lightly in your ear canal
    2. Rotate the earphone down until the ear tip forms a seal with your ear canal and the Fit Wing slips under your ear ridge as indicated below.